Pool Chemicals, Pool Maintenace and Cleaning, Phosphate Removers, Water Analysis Software, Algicides

Maxi-Floc Plus

A heavy duty liquid flocculent. A specialised blend of our liquid floc combined with a concentrated polymer resin Maxi Floc plus will settle debris and organic matter to the floor of the pool in 3 - 6 hours.

Benefits

Clears very cloudy pools in under 6 hours
Use to remove dead algae and other floating particles
No messy residue

Important Notes

Will not work if algae are present. Super chlorinate before using Maxi-Floc
Prior to adding Maxi-Floc, adjust pH between 7.5 and 7.8
If your TDS reading is above 1500ppm, this product will not work effectively
Unless sufficient Maxi-Floc is used, floccing activity will be minimal
Set the filter to BY-PASS or RECIRCULATE, otherwise remove filter grids prior to application
After debris has dropped to the bottom of the pool, vacuum, clean the filter and adjust your chemicals if necessary

Sizes

Quarts

Dosage

One quart treats 15,000 gallons of pool water

What is the difference between a clarifier and a flocculent?

A clarifier is designed to be used with a filter system, so particles coagulate in the filter. A flocculent is NOT to be used with the filtration system as the filter may clog. Flocculants are formulated to drop particles to the bottom of the pool, so they can be vacuumed away.

Is Maxi-Floc Plus effective in salt-water pools?

When using Maxi-Floc Plus in water containing rich concentrations of positively charged ions (salt-water pools) we always educated our dealers to be aware that the overall floc size is reduced. The result is a floc of lighter appearance and intensity than might otherwise be anticipated.

We have combated this reduced floc size with the new polymer resin thus ensuring Maxi Floc Plus is the most efficient and successful floc when used in salt water pools.