Home Algicides Phosphate Removal Phosphate plus 4 in 1 Bulk Phosphate Remover Clarifiers and Flocculants Maintenance and Cleaning Products Salt Specific Products Stain Treatments Water Analysis Software Partners Contact
Phosphate Removal
The ultimate solution to phosphate removal and prevention.
 
Designed to be used as a maintenance and preventative solution this unique formulation is highly concentrated and is safe to use with fish, mammals and in aquariums.
 
Benefits
  • Our new formula now removes over three times the phosphates as the original formula
  • Dramatically clarifies water giving instant satisfaction
  • Does not cloud water (unlike other phosphate removers)
  • Minimal filter pressure increase (see important notes below). 
Important Notes
  • Shake container well before use
  • Check filter pressure before you add Phosphate Plus 4 in 1.
  • If pressure is high, clean cartridge prior to adding Phosphate Plus 4 in 1
  • Add directly to skimmer with filter running normally
  • Can be used in freshwater/saltwater aquariums, lakes and ponds
  • Safe with fish and mammals
  • Non-toxic and biodegradable 
Sizes
  • Quarts
  • Gallons 
Where do phosphates come from?
 
Phosphates are organic building blocks that form when phosphoric acid reacts with various elements found in nature. Phosphates come from leaves, fertilizers, and bather wastes such as sweat and urine. Other phosphates sources are detergents, some insecticides, soft drinks, toothpaste and even some pool chemicals.
 
How much phosphate is too much?
 
As little as 0.2 ppm of phosphate can result in outbreaks. Interestingly, in cases where pools have excessive outbreaks, the test may register a very low or zero reading on the Phosphate Test Strips. This is because virtually all of the phosphate has been consumed. This phosphate is now organically bound and is not measured by the test. When outbreaks are treated (super chlorination and / or the addition of Lo-Chlor Pool Algicide), this organically bound phosphate will be released into the water.
 
Dosage Charts
 
 
 
 
Pools Up To 20,000 Gallons  
Phosphate Level (PPM) 
Number of 8 oz. Doses Required at 3 Day Intervals  
0.3 
2
0.4
3
0.5 
4
0.8 
6
1.0 
8
1.5 
12 
 
 
 
 
 
 
Pools Over 20,000 Gallons  
Phosphate Level (PPM) 
Number of 16 oz. Doses Required at 3 Day Intervals 
0.3 
2
0.4 
3
0.5 
4
0.8
6
1.0
8
1.5 
12